background image

15

7.  Place a sufficiently large cup under the coffee spouts (A7) 

and the frothed milk spout (D5). Adjust the length of the 
milk spout. To move it nearer the cup, simply pull it down-
wards (fig. 25);

8.  Follow the instruction for use below for each function.

Adjusting the amount of froth

Turn the froth adjustment dial (D1) to adjust the amount of froth 
on the milk delivered while making cappuccino and milk based 
coffees.  

Dial 
position

Description

Recommended for…

No froth

CAFFELATTE/MILK (hot 
milk)

Min. froth 

LATTE MACCHIATO/
FLAT WHITE

Max. froth

CAPPUCCINO / 
MILK (frothed milk)/ ESPRES-
SO MACCHIATO

Making cappuccino and milk based coffees 

automatically

The CAFFELATTE (B4), CAPPUCCINO (B3) and LATTE MACCHIATO 
(B5) buttons on the control panel (B) enable these drinks to be 
prepared automatically. Proceed as follows:
1.   Fill the milk container (D) and attach it as described above;
2.   Turn the froth adjustment dial (D1) on the milk container 

lid (D2) to the position corresponding to the required froth;

3.   Press the button corresponding to the required drink. 

The name of the drink selected is displayed together 
with a progress bar which gradually fills as preparation 
progresses;

4.   After a few seconds, frothed milk is delivered from the milk 

spout (D5) into the cup below. Then the machine automat-
ically makes the coffee after delivering the milk.

Preparing “MILK MENU” drinks

Besides the drinks described above, the appliance automatically 
prepares MILK (hot milk), FLAT WHITE, ESPRESSO MACCHIATO 
and MY MILK (customisable).
To prepare one of these drinks, simply proceed as follows:
1.  Fill the milk container (D) and attach it as described above 

(fig. 24);

2.  Turn the froth adjustment dial (D1) on the milk container 

lid (D2) to the position corresponding to the required froth;

3.  Press the

 MILK MENU

 button (B6);

4.  Press < (B4) or > (B8) until the drink to be programmed is 

displayed (MILK, FLAT WHITE, MACCHIATO or MY MILK);

5.  Press the 

OK

 button (B12- fig. 10) to start delivery;

6.  After a few seconds, frothed milk is delivered from the milk 

spout (D5) into the cup below. For drinks with coffee, the 
machine automatically makes the coffee after delivering 
the milk.

 Please note: general indications when preparing all 

milk based drinks

•   If you want to interrupt preparation during delivery, press 

the corresponding button.

•   At the end of delivery, to increase the quantity of milk or 

coffee in the cup, just press and hold (within 3 seconds) the 
button corresponding to the drink being made.

•   Do not leave the milk container out of the refrigerator for 

long periods. The warmer the milk (5°C is ideal), the poorer 
the quality of froth produced.

 

Cleaning the milk container after use

 Important! Danger of burns

When cleaning the internal tubes of the milk container (D), a lit-
tle hot water and steam leak out of the frothed milk spout (D5). 
Avoid contact with splashes of water.
“SET DIAL TO CLEAN” flashes on the display each time you use a 
milk function. To eliminate all milk residues, proceed as follows:
1.   Leave the milk container in the machine (you do not need 

to empty it);

2.   Place a cup or other recipient under the frothed milk spout;
3.   Turn the froth adjustment dial (D1) to “CLEAN” (fig. 26). A 

progress bar appears and gradually fills as the operation 
proceeds together with “Cleaning underway”. Cleaning 
stops automatically;

4.   Turn the dial back to one of the froth selections;
5.   Remove the milk container and always clean the steam 

connection nozzle (A8) with a sponge (fig. 27).

 Please note! 

•   To prepare a number of cappuccinos or milk based coffees, 

clean the milk container after you have prepared the last 
drink only.

•   The milk container can be kept in the refrigerator.
•   In some cases, to clean you must wait for the appliance to 

heat up.

Programming the quantity of coffee and milk 

in the cup for the CAFFELATTE, CAPPUCCINO and 

LATTE MACCHIATO buttons

The appliance is set by default to automatically deliver standard 
quantities. To change these quantities, proceed as follows:
1.  Place a cup under the coffee spouts (A7) and milk spout 

(D5);

Summary of Contents for ECAM45.76 Series




























Reviews: