27
4. DESCRIPTION
4.1 Description of the appliance
(page 3 - A )
A1. Beans container lid
A2. Pre-ground coffee funnel lid
A3. Beans container
A4. Pre-ground coffee funnel
A5. Grinding adjustment dial
A6. Cup warmer shelf
A7. Coffee spout (adjustable height)
A8. Hot water and steam connection nozzle
A9. Cappuccino maker selection ring
A10. Cappuccino maker
A11. Condensate tray
A12. Coffee grounds container
A13. Cup tray
A14. Drip tray
A15. Drip tray water level indicator
A16. Infuser door
A17. Infuser
A18. Water tank
A19. Water softener filter housing
A20. Water tank lid
A21. Main switch
4.2 Description of the touch screen
(page 2 - B )
A number of buttons on the panel have a double function. This is
indicated in brackets in the description.
B1.
button: turns the appliance on and off (standby)
B2.
button: to select coffee quantity
B3.
aroma selection button: to select the coffee taste
B4.
button: to make 1 cup of coffee with the settings
displayed
B5.
button: to make 2 cups of coffee with the settings
displayed
B6.
button: to make 1 cup of LONG coffee
B7.
button: to deliver steam
B8.
button: to deliver hot water
(When in the settings
menu: to enable and confirm the function selected)
B9. > button: to scroll through the menu items
B10. Display: guides the user in using the appliance.
B11. < button: to scroll through the menu items
B12. MENU/ESC button to access the menu
(When in the settings
menu, press to exit the menu)
4.3 Description of the accessories
(page 2 - C )
C1. “Total Hardness Test” indicator paper
C2. Pre-ground coffee measure
C3. Descaler
C4. Water softener filter (certain models only)
C5. Cleaning brush
5. BEFORE USE
5.1 Checking the appliance
After removing the packaging, make sure the product is com-
plete and undamaged and that all accessories are present. Do
not use the appliance if it is visibly damaged. Contact De’Longhi
Customer Services.
5.2 Installing the appliance
Important!
When you install the appliance, you should respect the follow-
ing safety warnings:
•
The appliance gives off heat. After positioning the appli-
ance on the worktop, leave a space of at least 3 cm be-
tween the surfaces of the appliance and the side and rear
walls and at least 15 cm above the coffee machine.
•
Water penetrating the coffee machine could cause dam-
age. Do not place the appliance near taps or sinks.
•
The appliance could be damaged if the water it contains
freezes. Do not install the appliance in a room where the
temperature could drop below freezing point.
•
Arrange the power cord in such a way that it cannot be
damaged by sharp edges or contact with hot surfaces (e.g.
electric hot plates).
5.3 Connecting the appliance
Important!
Check that the mains power supply voltage corresponds to that
indicated on the rating plate on the bottom of the appliance.
Connect the appliance to an efficiently earthed and correctly
installed socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualified
professional.
5.4 Setting up the appliance
Please note!
• Coffee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of cof-
fee in the mill. The machine is, however, guaranteed to be
new.
• You should customise water hardness as soon as possible
following the instructions in the section “14. SETTING
WATER HARDNESS”.
