9
en
Description of the accessories
(page 2 - C )
C1. Measuring scoop for pre-ground coffee
C2. Cleaning brush
C3. Descaler bottle
C4. Water softener filter (certain models only)
C5. Hot water spout
Description of milk container
(page 2 - D )
D1. Froth adjustment knob
D2. Frothed milk spout (adjustable)
D3. Milk intake tube
D4. CLEAN button
preliminary checks
checking the appliance
After removing the packaging, make sure the
product is complete and undamaged and that all
accessories are present.
Do not use the appliance if it is visibly damaged.
Contact De’Longhi Customer Services.
installing the appliance
Important!
When installing the appliance, respect the
following safety warnings:
• The appliance could be damaged if the
water it contains freezes. Do not install the
appliance in a room where the temperature
could drop below freezing point.
• The appliance gives off heat.
After positioning the appliance on the
worktop, leave a space of at least 1.18 in/
3 cm between the surfaces of the appliance
and the side and rear walls and at least 5.9
in/ 15 cm above the coffee maker.
• Water penetrating the coffee maker could
cause damage. Do not place the appliance
near water taps or sinks.
• Arrange the power cable in such a way that
it cannot be damaged by sharp edges or in
contact with hot surfaces (e.g. electric hot
plates).
connecting the appliance
Important!
Check that the mains power supply voltage
corresponds to the value indicated on the rating
plate on the bottom of the appliance.
Connect the appliance to an efficiently earthed
and correctly installed socket with a minimum
current rating of 10A only.
If the power socket does not match the plug on
the appliance, have the socket replaced with a
suitable type by a qualified professional.
using the appliance for the first time
Please note!
• Coffee has been used to factory test the
appliance and it is therefore completely
normal for there to be traces of coffee in the
mill. The machine is, however, guaranteed to
be new.
• You should customize water hardness as
soon as possible following the instructions
in the section “Setting water hardness” on
page 19.
1. Plug the appliance into the electrical socket
and press the main switch on the back of the
appliance (fig. 1).
You must first choose the language (the
languages scroll through at intervals of about 3
seconds).
2. When “English” appears, press the
button (fig. 2) for a few seconds until
“ENGLISH installed” is displayed.
Follow the instructions displayed by the
appliance:
3. “FILL TANK!”: remove the water tank, fill to
the MAX line with fresh water (fig. 3A) then
replace in the appliance (fig. 3B).
4. “INSERT WATER SPOUT!”: Check that the
hot water spout is inserted on the nozzle and
place a container with a minimum capacity of
3.4 oz / 100 ml underneath (fig. 4).
5. “Hot water... Confirm?” is displayed;
6. Press the
button to confirm. The
appliance delivers water from the spout then
goes off automatically.
The coffee maker is now ready for normal use.
Please note!
• When using the appliance for the first time,
you need to make 4-5 cups of coffee or 4-5
cappuccinos before the appliance starts to
give satisfactory results.
• When making the first 5-6 cappuccinos, it
Summary of Contents for ECAM23450SL
Page 1: ...2 2 B1 B10 B7 C3 C5 C2 C1 B8 B9 D1 D2 D4 D3 B6 B3 B2 B4 B5 B C D C4...
Page 2: ...3 3 P U S H A1 A10 A11 A13 A14 A17 A16 A18 A15 A9 C4 A8 A A12 A19 A3 A5 A6 A7 A4 A2...
Page 3: ...4 1 2 3A 3B 4 5 6 7 8 9 10 11 12 13 14 15 16 4...
Page 4: ...5 P U S H P U S H B A A B 18 17 19 20 21 23 24 25A 25B 26 27 28 29 30 31A 31B 22 CLEAN 5...
