background image

20

ty of 100 ml under the hot water spout.

13. Press  the 

button  to  confirm  the  selec-

tion.  The  appliance  begins  delivering  hot 

water and the message “ Please wait... “ is 

displayed.

14. After delivery, the appliance returns automa-

tically to the “Ready for coffee” position.

The new filter is active and indicated by an aste-

risk displayed under “Install filter” in the menu. 

You can now use the coffee maker. 

Replacing the filter

When “REPLACE FILTER!” is displayed, after two 

months (see date indicator) or when the applian-

ce has not been used for 3 weeks, you should 

replace the filter:

1.   Remove the exhausted filter;

2.   Remove the new filter from the packaging;

3.   Turn the date indicator disk (see fig. 30) until 

the next 2 months of use are displayed (the 

filter lasts about two months);

4.   Refill the tank;

5.   Insert the filter in the water tank and immer-

se it completely, sloping it to enable the air 

bubbles to escape (fig. 31); 

6.   Place the filter in the filter housing (fig. 32A) 

and press as far as it will go. Close the tank 

with the lid (fig. 32B), then replace the tank 

in the machine;

7.   Position a container with a minimum capaci-

ty of 100 ml under the hot water spout;

8.   Press the P button to enter the menu;

9.   Turn  the  selection  knob  until  “Replace  “  is 

displayed;

10.  Press the 

 button;

11.  The message “Confirm?” is displayed;

12. Press the 

 button to confirm the selec-

tion; 

13. “Hot Water… Confirm?” is displayed.

14. Press  the 

  button  to  confirm  the  se-

lection. The appliance begins delivering hot 

water  and  the  message  “Please  Wait...  “  is 

displayed.

15. After delivery, the appliance returns automati-

cally to the “Ready for coffee” position. 

The new filter is now active and you can use the 

coffee maker. 

Removing the filter

If you want to continue using the appliance wi-

thout a filter, you must remove it and notify the 

appliance of its removal as follows:

1.  Extract the tank and exhausted filter;

2.   Press the P button to enter the menu;

3.   Turn the selection knob (fig. 8) until “Install 

filter*” is displayed;

4.   Press the  

button;

5.   “Deactivate?” is displayed; 

6.   Press  the 

  button  to  confirm  and  the 

 button to exit the menu.

TECHNICAl SPECIFICATION

Voltage:  

220-240 V~ 50/60 Hz max. 10A

Absorbed power:  

1450W

Pressure:  

15 bars

Water tank capacity:  

1,8 l max.

Size LxHxD:   

238x340x430 mm

Cable length:  

1,15 m

Weight:  

9,1 kg

Beans container capacity:  

150 g

The appliance complies with the following 

EC directives: 

•  Stand-by Directive no. 1275/2008;

•  Low Voltage Directive 2006/95/EC and sub

-

sequent amendments;

•  EMC Directive 2004/108/EC and subsequent 

amendments;

•  Materials and accessories coming into con

-

tact  with  food  conform  to  EEC  regulation 

1935/2004.

DISPOSAl

  

Important information for correct dispo-

sal of the product in accordance with EC 

Directive 2002/96/EC.

At the end of its working life, the product 

must not be disposed of as urban waste.

It must be taken to a special local authority dif-

ferentiated waste collection centre or to a dealer 

providing this service.

Disposing  of  a  household  appliance  separately 

avoids  possible  negative  consequences  for  the 

environment  and  health  deriving  from  inappro-

priate disposal and enables the constituent mate-

rials to be recovered to obtain significant savings 

in energy and resources.

As a reminder of the need to dispose of house-

hold appliances separately, the product is mar-

ked with a rubbish bin bearing a cross.

Summary of Contents for ECAM23.450


























Reviews: