background image

18

TECHNICAL DATA

Mains voltage: ..........................................220-240V~50/60Hz
Absorbed power: ............................................................1100W
Pressure: .........................................................................15 bar
Water tank capacity:  ................................................... 1,1 litres
Cable lenght ...............................................................1100 mm 
Dimensions  ........................................LxHxP208x330x226 mm
Weight ........................................................................ 4 kg mm

 The appliance complies with the following EC 
directives:

•   Low Voltage Directive 2006/95/EC and subsequent 

amendments;

•   EMC Directive 2004/108/EC and subsequent amendments;
•   European Standby Regulation 1275/2008 and subsequent 

amendments;

•   Materials and accessories coming into contact with food 

conform to EEC regulation 1935/2004.

TROUBLESHOOTING...

Problem 

Possible causes 

Solution

No espresso coffee is delivered  No water in the tank 

Fill the tank with water

The holes in the filter holder are blocked  Clean the filter holder spout holes

The espresso boiler outlet is blocked 

Clean as described in the chapter “Cleaning”

Limescale in the water circuit 

Descale as described in the section “Descaling”

The espresso coffee drips from 
the edges of the filter holder 
rather than the holes 

The filter holder has been inserted incor-
rectly or is dirty 

Attach the filter holder correctly and rotate firmly 
as far as it will go

The espresso boiler gasket has lost elasti-
city or is dirty 

Have the espresso boiler gasket replaced by Custo-
mer Services

The holes in the filter holder spouts are 
blocked 

Clean the filter holder spout holes

The espresso coffee is cold 

The coffee OK light was not on when the 
coffee button was pressed. 

Wait until the OK light comes on

No preheating was done 

Preheat as described in the paragraph “Tips for a 
hotter coffee”.

The cups were not preheated 

Heat the cups by rinsing them in hot water or le-
aving them to rest for at least 20 minutes on the 
cup warmer tray.

Limescale in the water circuit 

Descale as described in the section “Descaling”

DISPOSAL

  

In compliance with European directive 2002/96/EC, 
the appliance must not be disposed of with house-
hold waste, but taken to an authorised waste separa-
tion and recycling centre.

Summary of Contents for EC 250 B








Reviews: