background image

5. CUSTOMISING THE APPLIANCE

USER MANUAL

23

CUSTOMISING

GB

The appliance is pre-set to average values. You can, however, permanently modify the setting according to
your own personal tastes.
After you have used the appliance for a while, we therefore recommended that you identify the right quan-
tities of coffee for each size cup you prefer then memorise them as follows.

5.1Customising the quantity of water for mild,
regular and strong coffee
A

. Select the strength of coffee you require (mild,

regular or strong) by pressing the button (

32

).

B

. Press the coffee delivery button (

38

) and

hold

it down

until the cup contains the required

amount of coffee (max. 200 ml), then release
it.

In order for the modifications to be memorised
correctly, you must hold the button down throu-
ghout the procedure

(from the start of grinding to

the end).
Repeat the operation for each strength of coffee.

A

B

5.2 Programming the quantity of coffee used
A

. Select the strength of coffee required (mild,

regular or strong) by pressing the button (

32

).

B

. Press the coffee quantity button (

33

) repea-

tedly until the indicator corresponding to the
required quantity of coffee lights up, then hold
the button down. After a few seconds, all the
other indicators light up.
Release the button (

33

). The new value is

memorised.

This procedure can be repeated for the other
strengths of coffee.

A

B

Note: 

when selecting the quantity of coffee, bear in mind that

the values increase from left to right. 
A greater quantity gives a stronger coffee. 
A smaller quantity gives a milder coffee.

5.3 Resetting the appliance to the original values

To reset the appliance to the original values, proceed as follows:

A.

Hold down the washing programme button (

41

) for at least 10 seconds. The

appliance goes off.

When turned on again, the original standard values will automatically be reset.

A

GB OK  27-09-2002  8:13  Pagina 23

Summary of Contents for EC 200.CD















Reviews: