41
ELECTRICAL FEEDER CABLE REPLACEMENT
WARNING: If the power supply cable is damaged, it must be replaced only by an
authorised service agent in order to avoid a hazard.
To connect the supply cable:
•
Remove the screw securing the cover “
A
” on the rear of the cooker (fig. 10.2).
•
Unscrew cable clamp “
D
” (fig. 10.3).
•
Connect the wires to the terminal block “
B
” as shown in the diagram in figure 10.4.
•
Take up any slack in the cable and secure with the cable clamp “
D
”.
•
Replace the cover “
A
”.
NOTE: The earth conductor must be left about 3 cm longer than the others.
FEEDER CABLE SPECIFICATIONS
Type “H05V2V2-F”
230 V~ 3 x 0,75 mm
2
A
D
B
Fig. 10.3
Fig. 10.2
230 V
PE N
L
1
(L
2
)
Fig. 10.4
