6
TM
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
The appliance doesn't work
Be sure it is plugged in and that the
electrical outlet is working.
Check for any obstruction.
The temperature may be set too low.
Plug into the power outlet.
Remove the obstruction and let the
appliance cool down. If the appliance
doesn't work please contact Customer
Experience.
Set the temperature to a higher position.
plugged into a power supply. When unplugged, the timer stops
and must be later re-set.
Timer override
If you wish to override the timer settings, push the timer switch
to position
I
(fig.2) manual (timer override). To return to timed
operation push the switch back to the middle position
(fig.2).
NOTE: if the timer switch is at the 0 position (fig. 2), the
heater is off and will not operate).
Heater off
Timer operation
Manual (timer override)
Safety device
A safety device shuts the radiator down in the case of
overheating. To start the radiator up again, contact Customer
Experience. See enclosed guarantee leaflet.
MAINTENANCE AND SERVICE
Always unplug the heater from the power outlet and allow the
radiator to cool. Wipe radiator with a soft damp cloth; do not
use detergents or abrasives. Should the radiator not be in use
over a certain length of time, wind the cord around the holder
and store it in a dry place. This appliance has been built to last
for many years of trouble-free service. In case of malfunction
or doubt, do not try to repair the heater by yourself: this might
increase the risk of fire and electric shock. Please refer to the
enclosed guarantee leaflet for service and assistance details.
