5
- It is important to ensure that the socket is adequately
earthed.
- This appliance complies with directive 2004/108/ec on
electromagnetic compatibility.
Keep loose clothing or bedding, furniture and flammable
material away from the power outlet where the heater is
plugged in.
First use
The first time the appliance is used, run it at the maximum
power for at least two hours. During this time, ventilate the
room thoroughly to eliminate the “new” smell released by the
appliance. It is completely normal for the appliance to emit
“creaking” sounds the first time it is run.
How to use your heater
Connect the plug to the electric socket, the light
(M) will
come on. Switch the appliance on by pressing the “ON/STAND-
BY “ button (B). The dispaly will show “
0:00
” blinking.
Now set the clock as given in pargraph: “setting the clock”.
Setting the clock
Set the clock to the correct time,
proceeding as follows:
- Press button “
+
” (E) or “
-
” (D)
until the display shows the
current time.
- To change the preset time
press the “MENU” button, 5 times so the display will show
the set time flashing. To adjust the time press button “
+
”
or “
-
”. To move through the hours or minutes quickly keep
the “
+
” or “
-
” button pressed for longer than 6 seconds.
When setting the correct time, the numbers will flash on the
display. The clock will continue to flash for a few seconds after the
adjustment has been made.
Manual operation (without timer)
To operate the heater without timer press the “POWER LEVEL
BUTTON” until the desired power level is showed on the display
see figure.
The working indicator light (L), indicates the heating status by
means of its colors.
RED:
the unit is heating at the maximum power.
YELLOW:
the unit is heating at the medium power.
GREEN:
the unit is heating at the minimum power.
absent:
the unit is not heating.
Setting the temperature (thermostat)
Once the power has been selected,
press the “
+
” or “
-
” button to select
the desired comfort temperature
from 10°C to 28°C (shown on the
right side of the display). This will
increase or decrease by 1°C. Keep
either button pressed down to move through the temperature
in fast move.
“ECO” Function
The “ECO” function can be selected either with the manual or
with the timer function.
Press the “ECO BUTTON”, the display will show “
ECO
“.
Press the “power level button” to limit the maximum input
power consumption. When the ambient temperature is close
to the set temperature, the appliance will automatically reduce
the power consumption, keeping the desired comfort with a
considerable consumption saving.
The display will always show the maximum allowed level whilst
the color of the working indicator light (L) will vary accordingly
to the operating power level. (red light: maximum power level;
yellow light: medium power level; green light: minimum power
level).
Antifreeze operating mode
Press button “
-
” to set the temperature to 5°C.
When the display shows 10°C and button “
-
” is pressed again,
the temperature set point is fixed to 5°C, Symbol Celsius flashes
and this situation will persist as long as the anti-freeze function
is active. When set in this way, the appliance will switch on
automatically only if the room temperature falls below 5°C,
thereby preventing freezing.
Note:
In this function the power level and the Eco function
can not be adjusted. The power level will be set to the maximum
power.
:
current time
°
C
:
°
C
:
°
C
:
°
C
MAN
:
°
C
:
°
C
:
°
C
:
°
C
MAN
:
°
C
:
°
C
:
°
C
:
°
C
MAN
:
Minimum power
Medium power
Maximum power
set temperature
°
C
:
