12
13
TIMER OPERATION MODE
In Timer operation mode the unit works according to a pre-
set daily timer program that can be altered to suit your needs.
Turn on the unit by pressing the
button and then press
the
button to activate the timer operation mode.
The symbol
will appear on the display together with the
pre-set temperature and power level assigned to the current
time interval.
Daily Timer program
The daily timer program consists of a 24 hour timeline that
can be divided into 96 time intervals of 15 minutes each. It is
possible to associate one of the 2 timer temperature settings
to each time interval, T1 or T2. The time intervals and the
temperatures T1 and T2 can be changed to suit your needs.
Pre-set daily timer program
The default pre-set daily timer program is the following:
l
T1= 21°C
l
T2= heating off
4
2
6
8 10 12 14 16 18 20 22 0(24)
0
21°C
Off
T2
T2
T2
T1
T1
Time intervals
T1
T2
How to change the daily timer temperatures
It is possible to change the temperature settings for T1 and T2
to better suit your needs. T1 is associated to Green light (
l
)
and can be set at any temperature from 10 to 28°C; T2 is as-
sociated to Red light (
l
) and can be set from off to anti-frost
5° or to any temperature from 10° to less than T1.
Min
10°C
Min
10°C
Max
28°C
Default
21°C
Default
Off
Anti-frost
5°C
Red light
Green light
T1
T2
Max
less than T1
To change the timer temperature setting, from manual op-
eration mode:
1. Press the control dial.
2. The power level will blink.
3. Turn the dial till you see the clock icon blinking and press
the dial.
4. A green light will appear on the display blinking. Turn
the dial to choose between green light (T1) or red light
(T2) and press to confirm.
5. The temperature digits will blink. Turn the dial to adjust
the temperature according to your needs and press the
dial to confirm.
6. The unit will exit the menu and the display will show the
manual operation settings.
Example of display:
❺
❻
❶
❸
❷
❹
Note:
Follow same 6 steps above to set the other daily timer
temperature not previously set.
How to change the daily timer program
1. To change the pre-set daily timer program the unit
must be turned into stand-by mode .
Press the Timer button for approx. 5 seconds.
2. The unit will emit a beep and 00.00 and the blinking
green light symbol will be displayed.
Turn the dial to select the Temperature T1=green light ,
or T2=red light, that you would like to have in the room
at 00:00 hours and press the dial to confirm.
3. The time digits will start blinking to enable setting the
