13
7. ALARMS ON THE DISPLAY
ALARM
CAUSE
SOLUTION
B4
C7
C3
C2
C1
C5
B5
B3
B2
B6
B1
C6
C4
The tank (A6) is missing or incorrectly
positioned
Put correctly the tank back in place (see par. “3.1
Draining into the tank”
The tank is full
Empty the tank (see par. “3.1 Draining into the tank”)
B4
C7
C3
C2
C1
C5
B5
B3
B2
B6
B1
C6
C4
Contact Customer Care
8. TROUBLESHOOTING
Below is a list of possible malfunctions.
If the problem cannot be resolved using the proposed solution, contact the Service Centre.
PROBLEM
CAUSE
SOLUTION
The appliance does not work
the appliance is not plugged in
plug into the mains
there is no current
check the power supply
the tank is full of water
position the tank correctly
the tank is incorrectly positioned
The appliance is operating in dehu-
midifying mode but the humidity does
not decrease
The filter is clogged
Clean the dust filter or nano silver filter
(par. “4.2 Cleaning the dust filter”)
Either the temperature or the humidity in
the room is too low
In certain conditions it is normal for the
appliance not to dehumidify: check the
operation limits of the appliance (see chap.
“6. Technical specification”). In certain cases
it is advisable to heat the room you wish to
dehumidify.
