30
REPLACING THE OVEN LAMP
WARNING: Ensure the appliance is switched off before replacing the lamp to
avoid the possibility of electric shock.
■
Let the oven cavity and the heating elements to cool down;
■
Switch off the electrical supply;
LEFT LAMP
(models with electronic programmer only)
:
■
Remove the left sliding shelf and the side catalytic panel by unscrewing the fix-
ing screws (see chapter USING THE OVEN FOR THE FIRST TIME at page 13).
■
Press down from the top the protective cover
A
(fig. 28) and remove it by rotat-
ing on the lower side.
IMPORTANT
: never use screwdrivers or other utensils to
remove the cover
A
. This could damage the enamel of the oven or the lam-
pholder. Operate only by hands.
■
Unscrew and replace the bulb
B
with a new one suitable for high temperatures
(300°C) having the following specifications: 230-240V 50 Hz, 25W, E14.
■
Refit the protective cover
A
operating in reverse order.
ATTENTION
: the notch
in the inner edge of the cover must be oriented toward the lamp.
■
Assemble the side catalytic panel and the left sliding shelf.
TOP RIGHT LAMP (all models):
■
Remove the protective cover
C
(fig. 28);
■
Unscrew and replace the bulb
B
with a new one suitable for high temperatures
(300°C) having the following specifications: 230-240 V 50 Hz, (15 W for models
with cut-off timer and 25 W for models with electronic programmer), E14
■
Refit the protective cover;
NOTE
: Oven bulb replacement is not covered by your guarantee.
A
B
B
C
1
2
A
A
Figure 28
Summary of Contents for DMFPS60BF
Page 36: ...RIF 1738 2...
