background image

18

To replace the filter later, press 

. The 

 sym-

bol appears on the display to remind you that the filter needs 
replacing. To replace, proceed as follows:
1.  Extract the tank (A17) and exhausted filter;
2.  Remove the new filter from the packaging;
3.  Access the menu as described in section "6.1 Access the 

settings menu";

4.  Follow the operations described in the previous section 

from point 3.

The filter is now active and you can use the coffee machine.

Please note! 

After two months (see date indicator) or when the appliance has 
not been used for 3 weeks, you should replace the filter even if 
the message has not yet been displayed.

15.3  Removing the filter

If you want to use the appliance without the filter (D7), you 
must remove it and notify the appliance of its removal. Proceed 
as follows:
1.  Extract the tank (A17) and exhausted filter;
2.  Access the menu as described in section "6.1 Access the 

settings menu";

3.  PRESS "WATER FILTER"; 
4.  Press the selector corresponding to " REMOVE WATER 

FILTER";

5.  "

CONFIRM FILTER REMOVAL": press 

  (or 

press 

 to go back to the settings menu);

6.  "FILTER REMOVED": the change has been saved. Press 

 to go back to the homepage.  

Please note! 

After two months (see date indicator) or when the appliance has 
not been used for 3 weeks, you should replace the filter even if 
the message has not yet been displayed.

16.  TECHNICAL DATA

Voltage: 

220-240 V~ 50-60 Hz max. 10 A

Power: 

1450 W

Pressure: 

1.9 MPa (19 bars)

Water tank capacity: 

1.8 l

Size LxDxH: 

240x440x360 mm

Cord length: 

1750 mm

Weight: 

10 kg

Beans container capacity: 

300 g

Frequency: 

2400/2483.5 MHz

Maximum transmission power 

10 mW

16.1  Tips for Energy Saving

•  Do not attach the accessories to the steam connection noz-

zle (A8) until needed for the beverage to be made. After 

delivery, remove the accessory.  (After delivering bever-

ages with milk, always clean the milk container (E) before 

removing); 

•  Set auto-off to 15 minutes (see paragraph "6.7 Auto-off 

(standby) 

"):

•  Enable Energy Saving (see paragraph "6.8  Energy saving 

");

•  When requested by the machine, perform the descaling 

cycle. 

Summary of Contents for Dinamica Plus ECAM370.85.S





















Reviews: