33
Should it be found that the gas taps are difficult to turn, most probably they require
lubrication. This should be done immediately this problem has been noticed as follows.
– Turn off the gas supply to cooker.
– Remove all control knobs.
– Remove control panel.
– Unscrew the two screws which mounts the gas tap to the gas rail.
– Remove the circlip and ignition switch from the front of the gas tap.
– Disassemble the body of the tap.
– Clean cone and housing with cloth soaked in thinners or similar, re-grease as required with
a special gas tap grease.
– Put cone back in housing and rotate a number of times. Remove cone and take off any
excess grease, making sure that gas passages are clear.
– Reassemble all pieces in opposite order to disassembly.
Lubrication of the gas taps
Summary of Contents for DFS 901SS
Page 35: ...35...