5
en
Notes:
When carrying out these operations be careful
not to incline the appliance by more than 45°; in any case,
once the castors have been assembled, wait at least one hour
before turning it on.
Draining the condensate water
the condensate can be drained in 2 ways:
a) Draining into the tank
the condensate can be drained directly into the tank.
With this draining system, when the tank is full, the applian-
ce stops and the screen displays the tank alarm
.
When the tank is full, remove it as shown in fig. 2 and empty
it into a sink or a bathtub.
When the operation is complete, put the tank back in correct-
ly being careful to position the handle as shown in figure 3.
b) Continuous external draining
if you require the appliance to operate for a long period of
time without periodically emptying the tank, we advise you
to set up continuous draining as follows:
• Open the door on the side of the appliance and screw
the pipe onto the fitting, as shown in figure 4.
• Insert a garden hose (not supplied with the appliance)
into the pipe and lead the end of the hose to a floor-
level drain. make sure the tank is inserted correctly.
• Make sure the hose is never placed at a height above the
level of the pipe (fig. 5).
otherwise the water will continue to drain back into the
tank. make sure there are no kinks in the hose.
use
fig. 1
a
b
fig. 2
fig. 3
2
fig. 4
fig. 5
no
no
yES
Summary of Contents for DDSE30
Page 1: ......
Page 2: ...5714810511_00 03 12...
