6
TECHNICAL DATA
absorbed power:
1800 W
bowl capacity:
152 oz (4.5 l)
For further information, see the rating plate on the appliance.
IF THE DEEP FRYER HAS A CORD WITH MAGNETIC
CONNECTOR
First, connect the magnetic connector to the appliance as shown
in figure 8, making sure the protruding part of the connector (X)
is correctly inserted into the corresponding outlet on the appli-
ance. Then plug the cord into the outlet.
Warning
Never leave the appliance plugged into the outlet if the mag-
netic connector is not fitted to the deep fryer, figure 9. If the
magnetic connector does not remain in place, check that it has
been inserted correctly, (see figure 8). If the problem persists,
contact an authorized service center. When the appliance is in
operation, always leave free space around the magnetic con-
nector to prevent it from becoming detached. Use type MC-316
cords provided by a De’Longhi authorized service center only.
IMPORTANT SAFEGUARD
A DEEP FRYER FALLING FROM A HIGH PLACE MAY CAUSE SERIOUS
BURNS. NEVER LEAVE THE CORD HANGING FROM THE EDGE OF
THE SURFACE THE DEEP FRYER IS RESTING ON WHERE IT COULD
BE GRASPED BY A CHILD OR GET IN THEWAY OF THE USER. DO
NOT USE EXTENSION CORDS.
KEEP OUT OF REACH OF CHILDREN
DESCRIPTION OF THE APPLIANCE
A. Display
B. “-/+” buttons to increase/decrease time and temperature
C. MODE button to select time/temperature modes
D. START/STOP button
E. Red POWER on light
F. Green “at temperature” READY light
G. LF button to melt the lard + counter reset
H. Safety micro-switch
I. Basket with folding handle
J. Maximum food quantity indicator
K. Removable bowl
L. Oil MIN-MAX levels
M. Basket support
N. Slot for fitting the control unit
O. Handles
P. Casing
Q. Oil drain tap (if fitted)
R. Oil drain tap cover (if fitted)
S. Cover with handle
T. Filter (if present)
U. Viewing window (if present)
V. Electrical heating element
W. Thermal safety device reset
Z. Filter oil
THERMAL SAFETY DEVICE
The appliance is fitted with a thermal safety device that stops
the appliance from heating in the event of incorrect use or ir-
regular operation. Once the appliance has cooled, using a tooth
pick or similar, delicately press the safety device reset button
(W) marked RESET (see Fig. 1). If the appliance does not start
operating again,contact a service centre authorised by the man-
ufacturer.
OPERATING INSTRUCTIONS
Before using the deep fryer for the first time, carefully clean,
using warm water and dishwashing detergent, the basket, the
bowl and the cover. The control unit, power cable and heating
element may be cleaned usinga damp cloth. Check that water
does not enter into the control unit and that there is no resid-
ual water in the bottom of the removable bowl. Carefully dry
all the parts. Check that the control unit is properly fastened to
the deep fryer body. The safety micro-switch (H) will prevent
the appliance from operating unless the control unit is correctly
positioned (N).
FILLING WITH OIL OR FAT
• Hook the handle as shown in fig. 10. Be carefull to fix well
the handle with the basket.
• Turn the folding handle of the basket until it locks into
place (pos. 2, Fig. 2). Remove the basket (I) by lifting it
upwards.
• Before pouring the oil, make sure that the oil drain tap (Q)
is well-shut.
• If oil is used, pour it into the bowl (K) until reaching the
maximum level indicated (see fig. 3). Never exceed this
limit, as oil may overflow from the container. The level of
oil must always be between the maximum and minimum
