9
COOKING WITH LOW FUNCTION
1. Place the unit on a clean, dry counter.
2. Remove glass lid.
3. Fill the pot with ingredients.
4. Replace lid.
From stand-by mode, turn the Function Selector Dial (A) to se-
lect LOW function.
The display will default to h10:00m flashing, than adjust cooking
time by pressing Time + / - push buttons (C).
Each pressing of + button will increase the time in increments of
15 minutes, for a maximum set time of h24:00m.
Each pressing of - button will decrease the time in increments of
15 minutes, till h00:30m.
Keep + button pressed for 2 seconds and the display will auto-
matically increase the time , in increments of 30 minutes until
the button is released.
Keeping - button pressed for 2 seconds the display will automat-
ically decrease the time , in increments of 30 minutes until the
button is released.
Pressing Start/Stop button (D) the selected cooking function is
started, the red light (E) around Start/Stop button will illumi-
nate. If Start/Stop button (D) is not pressed within 20 seconds,
the control goes in stand-by mode.
The display will stop flashing and the timer starts countdown.
It is possible to stop the function anytime by pressing Start/Stop
button (D). The red light (E) around Start/Stop button will turn
off, the display will default to stand-by mode.
Once set time is elapsed , the cooking has ended, the red light
around Start/Stop button will shut off, the display will show
“End” flashing for 5 minutes.
While “End” is flashing you can reset the control by pressing
Start/Stop button (D). The control will go into stand-by mode.
If no action is taken after 5 minutes of flashing, the control will
automatically default to KEEP WARM function.
Keep warm red light (F) will illuminate, the red light (E) around
Start/Stop button will illuminate.
Once Keep Warm function maximum of 12 hours timing has
elapsed, the control will turn off and will go into stand-by mode.
COOKING WITH MEDIUM FUNCTION
1. Place the unit on a clean, dry counter.
2. Remove glass lid.
3. Fill the pot with ingredients.
4. Replace lid.
From stand-by mode, turn the Function Selector Dial (A) to se-
lect MEDIUM function.
The display will default to h08:00m flashing, than adjust cooking
time by pressing Time + / - push buttons (C).
Each pressing of + button will increase the time with 15 minute
increments, for a maximum set time of h16:00m.
Each pressing of - button will decrease the time with 15 minute
increments, till h00:30m.
K button pressed for 2 seconds the display will auto-
matically increase the time , with 30 minute increments until the
button is released.
Keeping - button pressed for 2 seconds the display will automat-
ically decrease the time, with 30 minute increments until the
button is released.
Pressing Start/Stop button (D) the selected cooking function is
started, the red light (E) around Start/Stop button will illumi-
nate. If Start/Stop button (D) is not pressed within 20 seconds,
the control goes in stand-by mode.
The display will stop flashing and the timer starts countdown.
It is possible to stop the function anytime by pressing Start/Stop
button. The red light (E) around Start/Stop button will turn off ,
the display will default to stand-by mode.
Once set time is elapsed, the cooking has ended, the red light
(E) around Start/Stop button will turn off, the display will show
“End” flashing for 5 minutes.
While “End” is flashing you can reset the control by pressing
Start/Stop button (D). The control goes into stand-by mode .
If no any action is taken after 5 minutes flashing, the control will
automatically switch to KEEP WARM function.
Keep warm red light (F) will illuminate, the red light (E) around
Start/Stop button will illuminate.
Once Keep Warm function maximum of 12 hours time has
elapsed , the control will turn off and will go into stand-by mode.
