13
• Machine does not work and switch light does
not come on
• Coffee does not come out
• Coffee comes out too quickly
• Coffee comes out too thick or too slowly
• Coffee comes out from the filter-holder edge
• Coffee in the cup is cold
• No steam is produced
• The milk does not foam
• The cap will not unscrew
• Switch to “ON” position
• Plug in
• Check that the switch is set to “ON “
• Fill the water tank
• Grind coffee more coarsely
• Reduce the quantity of coffee in the filter
• If you have used your machine for a few
months, follow descaling instructions on page 9.
• Use finer ground coffee
• Increase the quantity of coffee in the filter
• Use more coarsely-ground coffee
• Reduce the quantity of coffee in the filter
• Insert the filter-holder correctly and pull to the
right
• Clean the edge of the filter-holder
• Rinse filters, filter-holder and cups (or carafe)
in hot water before making espresso coffee
• Check that the switch is in the “ON” position
• Check that the steam knob has been turned
correctly
• No water in the reservoir tank
• No milk in the milk container or no water in
the reservoir tank.
• Wait until the “OK” pilot lamp lights.
• Check that the steam knob has been turned
counter-clockwise
• Use fresh milk (not boiled)
• Check that the milk container and the rubber
joint have been inserted correctly
• Clean the mixer and the rubber joint
• Check to make sure there is no pressure in
the boiler by rotating the steam knob and
turning the flow regulator to the LIGHT setting.
ESPRESSO TROUBLESHOOTING
PROBLEM
SOLUTION
