-
-
10.2.1.3 Channel Grouping
The channels can be sorted into different groups. Choose 1-8 in order to enter
the different groups.
10.2.1.4 Edit Channel
- Press <RED> key to enter Add a new channel.
a) Area Name: choose area name
b) Carrier: Choose the different DVBT provider.
c) Channel Name: Name the new channel „new channel“ or enter a channel
name.
d) Audio PID, Video PID, PCR PID, Press <0-9> number key to revise values.
e) Press <OK> key to confirm the adding.
- Press <YELLOW> key to change a channel.
10.2.1.5 Delete All
In order to delete all channels press <OK> and enter the password “0000”.
10.2.2 Installation
10.2.2.1 Only FTA/ALL
This is a option for channel list. When you choose Only FTA, in channel list it only
showes Free to Air channel even if the unit found all channels. If you choose ALL,
it will show all channels.
10.2.2.2 AUTO SEARCH
Press auto-search, all TV and radio channels will be searched.
As soon as all channels are found, this sub-menu will be closed.
10.2.2.3 MANUAL SEARCHING
If you want to find digital TV through the frequency, you should use the manual
search.
- Enter following parameter: Channel Name, Frequency and Band Width
- Press <OK> to start manual scan.
10.2.2.4 RANGE SEARCHING
- Prior to range scanning, you need to configure relevant parameters including:
Start Frequency, End Frequency, and Band Width.
10.2.2.5 LCN Setting
Choose <ON >, all channels will be listed according to a logical channel number.
If you choose <OFF>, it will show channel according to the order of frequency.
