-3-
English
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
Hardware Installation
1.
Use HDMI cables to connect the HDMI input interfaces of the product to the HDMI output ports on the PCs. Use
USB cables to connect the USB input interfaces of the product to the USB port on the PCs respectively.
2.
Connect the HDMI output of the HDMI switch to an HD display device via an HDMI cable.
3.
Connect the keyboard, mouse and USB2.0 devices to the corresponding interfaces of the KVM switch.
4.
Connect the power adapter to the KVM and check that the power LED lights up.
1.
Select the computer screen you want to operate by mouse click, keyboard hotkey, front panel button or IR remote
control.
Display modes
PC1
PC2
PC4
PC3
PC1
PC2
PC4
PC3
4IN1
PC3
PC2
PC1
PC4
The product provides 5 screen modes:
4 in 1: The 4 PCs are displayed in a 2x2 configuration on the screen, you can operate 4 PCs without switching.
PC1: PC1 full screen mode, you can operate PC1 only.
PC2: PC2 full screen mode, you can operate PC2 only.
PC3: PC3 full screen mode, you can operate PC3 only.
PC4: PC4 full screen mode, you can operate PC4 only.
Through Mode & Sync Mode
There are 2 modes for keyboard & mouse in 4 in 1 mode:
Through Mode:
In this mode, the mouse can move freely across the screen of 4 PCs. You can operate any PC at will.
The keyboard and USB2.0 device will be switched to the PC where the mouse stays.
Sync Mode:
In this mode, the keyboard & mouse can synchronously operate 4 PCs, and the USB2.0 devices will stay
on the PC of your last selection.
Front Panel
ʒ
ʕ
ʔ
ʓ
IR
Power PC1 PC2 PC3 PC4 4IN1
ʗ
ʖ
ʘ
Mode Audio Reset
1.
IR: Remote control receiver window.
2.
POWER LED: This blue LED illuminates when the device is connected with power supply.
3.
Input Port LED: Indicate which input port is selected.
4.
4 in 1 Mode LED: Indicate when 4 in 1 mode is selected.
5.
Mode Button: Press this button to select the input mode.
6.
Audio Button: In 4 in 1 mode, press this button to select the audio from the input sources.
7.
USB Reset Button: Press this button to reset the KVM switch.
