
-4-
English
Note:
Please don’t use the switch button while the computer is booting.
The included cables can be combined to a DisplayPort to DisplayPort cable if
required.
When using USB sticks, the maximum USB 2.0 data rate is 60 MB/s.
It is possible that wireless keyboards and mice do not work or only work to a
limited extent on the switch.
Operation for controlling the device via the RS-232 interface
1.
Connect the serial port of the switch to a PC with a serial cable or a serial
adapter.
2.
Start a terminal software for serial communication.
3.
Choose the correct COM port and set the parameters as follows:
ANSI 4800 8-N-1-none
4.
To control the function, input your command and finish with "Enter".
Both capital and small letters of the command are fine.
Input the next command within three seconds or "Overtime instruction" will
appear.
The input command should be correct, or it will be rejected with "Wrong
instruction"
If the input or output that you select is not connected, "Ineffective instruction"
will inform you.
If the command was performed, you can see "Successful operation".
Command
Function
ON
Turn the product ON
OFF
Turn the product OFF
QS
This command shows which inputs and outputs are available,
and the current connections of input and output.
DP1
Select source1 as input, DisplayPort as output
DP2
Select source2 as input, DisplayPort as output
HDMI1
Select source1 as input, HDMI as output
HDMI2
Select source2 as input, HDMI as output