Delmhorst 50406Q5 Owner'S Manual Download Page 17

We recommend that you spot check the windrow and freshly
made bales to give additional information with regard to
these differences and to help establish the appropriate range
for baling.

CARE OF YOUR METER

To keep your meter in good working order:

h

Store your meter in a clean, dry place. The optional

protective carrying case is an ideal storage place when
the meter is not in use.

h

Change the 9-Volt battery as needed. Continued use with a

low battery may cause the meter to go out of calibration.

h

Clean the meter and probe with any biodegradable cleaner.

Use the cleaner sparingly and on external parts only. 

Do

not immerse the meter or any prod in water.

h

Remove the battery if the meter will not be used for one

month or longer.

WARRANTY

Delmhorst Instrument Co., referred to hereafter as

 

Delmhorst, guarantees its FX-2000 meter for three years

 

from date of purchase and any optional electrodes against

 

defects in material or workmanship for 90 days. This limited

 

warranty does not cover abuse, alteration, misuse, damage

 

during shipment, improper service, unauthorized or unreason-

able use of the meter or electrodes. This warranty does not
cover batteries, pin assemblies, or pins. If the meter or any
optional electrodes have been tampered with, the warranty
shall be void. At our option we may replace or repair the
meter.

Delmhorst shall not be liable for incidental or consequential
damages for the breach of any express or implied warranty
with respect to this product or its calibration. With proper care
and maintenance the meter should stay in calibration; 
follow the instructions in the 

Care of Your Meter

section. 

Under no circumstances shall Delmhorst be liable for any
incidental, indirect, special, or consequential damages of any
type whatsoever, including, but not limited to, lost profits or
downtime arising out of or related in any respect to its 

16

FX-2000 B&W manual:FX-2000 B&W manual 50406Q5  12/10/08  8:57 A

www.

.com

[email protected]

1.800.561.8187

Summary of Contents for 50406Q5




















Reviews: