www.dellonda.co.uk
9
Contents
Safety net assembly
Step 1: Connect the upper pole A to the upper pole B, depress the spring connector and carefully slide the two sections together until the spring
connector pops out of the locating hole (Fig. 1), Repeat this process until all of the net poles are connected.
Step 1: Slide the sections of foam padding over the poles in turn (Fig. 2). and screw into place the top cap on each pole using the self tapping screws
Step3: Over the assembled pole slide the waterproof cover sleeve ensuring it slides over the top of the cap but not over the shoulder and down the
pole (Fig. 3)
Fig.1
Fig.2
Fig.3
Upper pole B
Foam padding
Spring clip
Upper pole A
Cap
Cover sleeve
Pole assembly
Step 4: Line up the net poles with the holes in the leg extensions on the main frame as shown (Fig.4), pass the coach bolts through the leg, bar
spacer, frame leg add the curved washer (Fig.5), tighten off with the capped nuts on the inside of the leg assembly (Fig.6).
Fig.4
Fig.5
Fig.6
8. Washers
