4 www.dellonda.co.uk
• Remove the drain plug and collect melt water
in suitable container.
DO
NOT
tip the unit in
order to drain it.
• Wipe the internals dry using a clean, dry cloth
to absorb any remaining liquid.
Display code
Possible cause and solution
F1
Low power protection. Change Battery protection mode from ‘H’ to ‘M’ or from
‘M’ to ‘L’
F2
F
an overload. Turn off and leave for 30 minutes.
F3
C
ompressor protection activated. Turn off and leave for 30 minutes.
F4
C
ompressor overloaded. Turn off and restart after 30 minutes.
F5
C
ompressor controller protection activated. Turn off and leave for 30 minutes.
F6
No parameter detected by controller. Restart unit.
F7/F8
T
emperature sensor error. Turn off and restart unit.
If the issue is not resolved by carrying out the above procedures please contact Dellonda.
Troubleshooting
Dellonda Limited
Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284
757575 [email protected] www.dellonda.co.uk
Environment Protection and Waste Protection and Electrical
Equipment Regulations
(WEEE)
Recycle unwanted packaging materials. When this product is no longer required, or
has reached the end of it’s useful life, please dispose of it in an environmentally
friendly way. Drain any fluids (if applicable) into approved containers, in accordance
with local waste regulations. It is our policy to continually improve products and we
reserve the right to alter data, specifications and parts without prior notice.
No liability is accepted for incorrect use of this product.
Guarantee is 12 months from purchase date, proof of which is required for any claim.
