www.dellonda.co.uk 3
•
Check fixings for tightness every 2 months.
• Note: this product is intended for indoor use
only.
•
WARNING
! This product contains high
pressure gas spring parts. Do not put into a
fire, high temperature or disassemble it.
• To ensure the sealing performance of the gas
spring the upper arm (with the spring) should
adjusted properly each month.
Step 1: Preparation before
monitor installation
• Make sure there are
VESA
holes 100 x 100mm
or 75 x 75mm in the monitor. If not, the mount
can not be installed, refer to diagram above.
•
Remove the original fixed base of the monitor.
Be careful to not scratch the screen.
Step 2A: Option 1
Step 2B: Option 2 Grommet
