11
WALL-MOUNTED INSTALLATION
9
1.Fix the wall hanging holder on the wall by using the 4*45mm screws and screw expansion tubes.
(As shown in figure A)
2, the heater hanging on the wall above the bracket (as shown in Figure b), then to about two screws
loosen (as shown in Figure CD), the glass components to take down, pebble is placed inside the slot
(as shown in Figure E), then glass component mounted back to the original place (figure f shown),
lock screw, plug in the power.
Put in the rock
E
F
01. Fix the wall hanging holder on the wall by using the 4*45mm screws and screw expansion
tubes. (As shown in figure A)
02. the heater hanging on the wall above the bracket (as shown in Figure b), then to about two
screws loosen (as shown in Figure CD), the glass components to take down,
pebble is placed inside the slot (as shown in Figure E), then glass component
mounted back to the original place (figure f shown), lock screw, plug in the power.
03, Note: if you choose to hang on the wall, you can no longer be fixed to the support
of the product.
Summary of Contents for 050-HA-50138
Page 2: ...2 ...
