6
CONTROL PANEL
01. ON/OFF button: Powers the display on and off.
02. Mode button：To select between High：Low and Eco modes.
03. High Mode indicator light: Will be lit when High Heat mode is engaged.
04. Temp up button: To increase desired temperature.
05. Temp down button: To decrease desired temperature.
06. Timer button：Used to engage timer mode and to set hour value for the timer.
07. °C/°F Button : Alternates between Fahrenheit and Celsius.
08. Digital display：Indicate set room temperature or time.
09. Celsius indicator light: Will be lit when temperature displayed is in Celsius.
10. Fahrenheit indicator light: Will be lit when temperature displayed is in Fahrenheit.
11. Low Mode indicator light: Will be lit when Low Heat mode is engaged.
12. Energy-saving mode indicator: Will be lit when energy-saving mode is engaged.
REMOTE CONTROL
5
1
ON/OFF button: Powers the display on and off.
2
Mode button
To select between High
Low and Eco modes.
3
High Mode indicator light: Will be lit when High Heat mode is engaged.
4
Temp up button: To increase desired temperature.
5
Temp down button: To decrease desired temperature.
6
Timer button
Used to engage timer mode and to set hour value for the timer.
7
/
Button : Alternates between Fahrenheit and Celsius.
8
Digital display
Indicate set room temperature or time.
9
Celsius indicator light: Will be lit when temperature displayed is in Celsius.
10
Fahrenheit indicator light: Will be lit when temperature displayed is in Fahrenheit.
11
Low Mode indicator light: Will be lit when Low Heat mode is engaged.
12
Energy-saving mode indicator: Will be lit when energy-saving mode is engaged.
Control Panel
6
PREPARATION
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet.
and
turn on the power switch in the rear of the unit. Only operate heater in upright position with
caster wheels attached.
Insert 2 AAA batteries into the remote control before using (Batteries Not Included)
OPERATING INSTRUCTIONS
1
Start and select working mode
Or
Turn the heater on by pressing the ON/OFF button on the
control panel or by pressing the Power button on the
supplied remote control.
Once power is off, heating element will stop working at
first. Fan will prolong working for 3 min to emit plenty of
heat inside. This mark will indicate running during the 3
Remote Control
/
button: Button for alternating between Fahrenheit and Celsius
ON/OFF button: Used for power-on or power-off
Temp up button: to make set temperature rise
Temp down button: to make set temperature decline
Timer button: Used for setting timer and adjust time value of timing
Mode button
Used for mode selection
Temp up button: to make set temperature rise
ON/OFF button: Used for power-on or power-off
Temp down button: to make set temperature decline
Mode button:Used for mode selection
°C/°F button: Button for alternating between Fahrenheit and Celsius
Timer button: Used for setting timer and adjust time value of timing
