OUR BRAND
8
REMOTE CONTROL
PREPARATION
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet.
and turn on the power switch in the rear of the unit. Only operate heater in upright
position with caster wheels attached.
Insert 2 AAA batteries into the remote control before using (Batteries Not Included)
OPERATING INSTRUCTIONS
01. START AND SELECT WORKING MODE
6
PREPARATION
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet.
and
turn on the power switch in the rear of the unit. Only operate heater in upright position with
caster wheels attached.
Insert 2 AAA batteries into the remote control before using (Batteries Not Included)
OPERATING INSTRUCTIONS
1
Start and select working mode
Or
Turn the heater on by pressing the POWER button on the
control panel or by pressing the Power button on the
supplied remote control.
Once power is off, heating element will stop working at first.
Fan will prolong working for 3 min to emit plenty of heat
inside. This mark will indicate running during the 3 min.
Or
Select a heat setting.
Press the HEATER button to toggle between the two heat
settings.
Remote Control
Heater button: Set up the heater mode and turn off
Power button: Powers the display on and off
Up button: For setting temperature or time upward
Down button
For setting temperature or time downward
Timer button: User setting timing boot or shutdown
Flame light button: Adjust the brightness of the flame
6
PREPARATION
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet.
and
turn on the power switch in the rear of the unit. Only operate heater in upright position with
caster wheels attached.
Insert 2 AAA batteries into the remote control before using (Batteries Not Included)
OPERATING INSTRUCTIONS
1
Start and select working mode
Or
Turn the heater on by pressing the POWER button on the
control panel or by pressing the Power button on the
supplied remote control.
Once power is off, heating element will stop working at first.
Fan will prolong working for 3 min to emit plenty of heat
inside. This mark will indicate running during the 3 min.
Or
Select a heat setting.
Press the HEATER button to toggle between the two heat
settings.
Remote Control
Heater button: Set up the heater mode and turn off
Power button: Powers the display on and off
Up button: For setting temperature or time upward
Down button
For setting temperature or time downward
Timer button: User setting timing boot or shutdown
Flame light button: Adjust the brightness of the flame
Power button: Powers the display on and off
Up button: For setting temperature or time upward
Down button:For setting temperature or time downward
Flame light button: Adjust the brightness of the flame
Heater button: Set up the heater mode and turn off
Turn the heater on by pressing the ON/OFF button on the
control panel or by pressing the Power button on the supplied
remote control.
Once power is off, heating element will stop working at first.
Fan will prolong working for 3 min to emit plenty of heat
inside. This mark will indicate running during the 3 min.
Select a heat setting.
Press the HEATER button to toggle between the two
heat settings.
Summary of Contents for 050-HA-50080
Page 2: ...2...
