18
User Instruction
Storage:
If the unit will not be used for an extended period of time:
1. Drain the water tank completely. Leave the drain outlet unplug for longer time and allow all water to
drain . Once the tank is completely drained and no more water flows out, reinstall the rubber plug and
cap.
2. Remove and clean the filter, allow it to dry completely, then reinstall it.
3. Remove the batteries from the remote control.
4. Store the air conditioner in a cool, dry place.
Avoid expose to direct sunlight, extreme temperature, and/or excessive dust.
Before using the unit again:
1. Make sure the filter and drain cap are in place.
2. Make sure the power cord is in good condition and without any cracks or damage.
3. Place new batteries in remote control.
4. Install the unit as described in the installation instruction.
Clearing the filter:
To keep your air conditioner working efficiently, you should clean the
filters every week of operation.
Grasp the upper panel tab and take off the filter behind the grill on the
back panel as shown in the figure to the right.
Wash the filter using liquid dish-washing detergent and warm water.
Rinse filter thoroughly. Gently shake excess water from the filter. Be
sure filter is thoroughly dry before replacing. You may also vacuum the
filter.
Replace the filter after the filter is dry.
