7
3.
Remote Control Operation
The Remote control transmits the signal to system.
Button: press this button to start unit when it is energized or stop the unit when it is
in operation.
Button: press this button to set unit automatic on and off time
Button: press this button to select high speed of fan running (except dry and sleep
modes)
Button: press this button to select low speed of fan running.
Button: press this button to increase temperature or timer setting.
Button: press this button decrease temperature or timer setting.
Button: press this button to make Celsius degrees and Fahrenheit degrees interchange.
Button:
press this button to select “Cool” mode.
Button:
press this button to select “Fan” mode
Button:
press this button to select “Dry” or “dehumidifying” mode
Button:
press this button to select “Sleep” function under cooling mode.
Before using your remote, install the AAA batteries into remote control.
1.
Press and glide the battery cover on the back of the remote control, then you can remove the cover.
2.
Insert two new alkaline AAA batteries into the battery compartment. Be sure to note the proper polarity.
3.
Reattach the battery cover and make sure the locking tab clicks into place.
Notes:
Use alkaline batteries only. Do not use rechargeable batteries.
When replace batteries, always replace both batteries with new batteries, do not mix old and new batteries.
If the air conditioner will not be used for an extended period of time, remove the batteries from the remote
control.
CAUTION
If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water, do not use the remote
Be sure to note proper
polarity of batteries
