CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE
10
11
CLEANING AND MAINTENANCE
The dust collector cell needs cleaning when:
The dust collector cell may not require cleaning if “arcing” occurs. Arcing is a sharp snapping sound that
occurs when large particles are collected in the dust collector cell or the appliance used in over damp
rooms.
Cleaning the D
ust
Collector Cell
Remove the front cover, dust
collector cell and pre-filter
Soak the dust collector cell before
cleaning
1
2
·
Please refer to page 9 for detailed instructions
on the removal of the dust collector cell and
pre-filter.
Caution
①
Use mild detergent
Place the dust collector cell in sink, bathtub or
other location where cleaner can cover every
surface.
②
Use warm water(below 40
℃
) only!
Tough residue such as tar from tobacco
smoke does not wash away easily:
“
CLEAN CELL” indicator appears or blinks on the screen
The dust collector cell is too dirty or continuous arcing occurs
1
2
4
3
6
5
Clean the Front Cover
·
Use a soft and wet cloth to clean, avoid scraping off
the paint on the cover.
·
Use provided brush to clean the air inlets and outlets
Clean the Pre-filter
·
Suggested cleaning time: 2-4 weeks
·
Rinse thoroughly by flowing water and dry
Clean the Dust Collector Cell
·
Suggested cleaning time: 4-8 weeks
·
Cleaning method please refer to instructions
on page 11
·
Suggested cleaning time: 1-2 months
·
When sensor gets dirty or blocked by other objects,
use cotton swab to wipe dust off, otherwise the
sensitivity will decrease.
Clean the Unit Body
·
When Cleaning, do not get the UV LED wet
·
Using wring dry cloth to clean
Replace the filters
Clean the Sensor
Reset the "REPLACE FILTER” indicator
Please refer to instructions on page 7 for resetting after
replacement, otherwise the indicator will remain on screen.
·
Suggested cleaning time: 6 months
·
When filters is dark grey or “REPLACE FILTER”
indicator appears
·
:
use
a
vacuum cleaner to eliminate
dust on the filter.
TiO
2
Filter
HEPA+Activiated Carbon Filter
(2 in 1)
TiO
2
Filter
Summary of Contents for 048-GM-48326
Page 1: ...048 GM 48326...
