6
Ozone Cell Cleaning
Always turn off the and unplug the unit from power outlet before servicing or cleaning.
Loosen the screw on the side of the unit.
Remove the ozone terminal.
Clean the ozone plates with alkalinity water then rinse with pure water.
Make sure all the components are completely dry before re-installing into the unit.
If you suspect a problem with your unit, check the following:
Make sure the unit is plugged to a grounded socket and turned on.
Ozone plates are clean and dry.
Fuse is installed properly and in working condition. Replace with a new 2 amp, 5 mm x 20 mm fuse if
necessary.
Contact customer service if the unit is still not operating.
Troubleshooting
Care and Maintenance
