Dell XPS L502X Service Manual Download Page 41

Page: 41 / 110

Hard Drive

CAUTION:

When the hard drive is not in the computer, store it in protective

antistatic packaging (see "Protecting Against Electrostatic Discharge" in the
safety instructions that shipped with your computer).

Replacing the Hard Drive

Follow the instructions in "Before You Begin" on page 9.

Remove the new hard drive from its packaging.
Save the original packaging for storing or shipping the hard drive.

Slide the hard drive into the hard-drive bracket.

Replace the four screws that secure the hard-drive bracket to the hard

drive.

Place the hard-drive assembly in the hard-drive bay.

Slide the hard-drive assembly to connect it to the system board connector.

screws (4)

hard-drive bracket

hard drive

Summary of Contents for XPS L502X















































































































Search results

Summary of Contents for XPS L502X

Reviews:

Related manuals for XPS L502X

Brands by name

Popular brands

Dell XPS L502X, Service Manual

Search results

Summary of Contents for XPS L502X

Reviews:

Related manuals for XPS L502X

Brands by name

Popular brands