Dell XPS 8700 Owner'S Manual Download Page 79

Page: 79 / 86

System

Setup |

SATA 3

Device Type

Displays the type of device connected.

Device ID

Displays the device identification code.

Device Size

Displays the size of the SATA device present in

your computer.

mSATA Device

Device Type

Displays the type of device connected.

Device ID

Displays the device identification code.

Device Size

Displays the size of the mSATA device present in

your computer.

Advanced

→

Processor Configuration

Intel(R) Hyper-Threading

Technology

If enabled, each physical processor core appears as
two logical processor cores.

Intel(R) SpeedStep

Technology

If enabled, the processor clock speed and core
voltage are adjusted dynamically based on the
processor load.

Intel(R) Virtualization

Technology

If enabled, a Virtual Machine Monitor (VMM) can
access your computer.

CPU XD Support

If enabled, allows your computer to use Executive
Display (XD) to hinder software that exploits buffer
overflows.

NOTE:

Windows 8 enables this feature even if this

feature is set to disabled.

Limit CPUID Value

If enabled, limits the maximum value the processor
CPUID function supports.

Multi Core Support

If enabled, allows your computer to use all cores
available in the processor.

Intel(R) Turbo Boost

Technology

If enabled, allows your computer to use turbo boost
when required.

Advanced

→

USB Configuration

Front USB Ports

Allows you to enable or disable the USB ports at the
front of your computer.

Rear USB Ports

Allows you to enable or disable the USB ports at the
back of your computer.

Top USB Ports

Allows you to enable or disable the USB ports at the
top of your computer.

OM_Book.book Page 79 Tuesday, April 30, 2013 6:07 PM

Summary of Contents for XPS 8700























































































Search results

Summary of Contents for XPS 8700

Reviews:

Related manuals for XPS 8700

Brands by name

Popular brands

Dell XPS 8700, Owner'S Manual

Search results

Summary of Contents for XPS 8700

Reviews:

Related manuals for XPS 8700

Brands by name

Popular brands