manualshive.com logo in svg

Dell XPS 630i, Service Manual, Page: 62 / 120

Share
Download
Dell XPS 630i Service Manual Download Page 62

62

Drives

7

Attach the media card reader cable to the back of the media card reader.

8

Check all cable connections and fold cables out of the way to avoid 
blocking airflow between the fan and cooling vents.

9

Replace the drive panel (see "Installing the Drive Panel" on page 54).

10

Replace the computer cover (see "Replacing the Computer Cover" on 
page 119).

 

NOTICE: 

To connect a network cable, first plug the cable into the network port or 

device and then plug it in to the computer.

11

Connect your computer and devices to electrical outlets, and then turn 
them on.

See the documentation that came with the drive for instructions on 
installing any software required for drive operation.

12

Enter system setup (see "Entering System Setup" in the 

Owner’s Manual

) 

and select the appropriate 

USB for FlexBay 

option.

1

drive-release latch

2

media card reader

1

2

book.book  Page 62  Monday, January 7, 2008  2:53 PM

Summary of Contents for XPS 630i

























































































































Reviews:

No comments