Dell XPS 17 9720 Service Manual Download Page 38

Page: 38 / 71

System board

System board callouts

1. Power-button cable
2. Left fan cable
3. Left speaker cable
4. Keyboard cable
5. Antenna cables
6. Right speaker cable
7. Right fan cable
8. Display cable and camera cable

Removing the system board

Prerequisites

1. Follow the procedure in

Before working inside your computer

NOTE:

The Service Tag of your computer is stored in the system board. Enter the Service Tag in the BIOS setup

program after you replace the system board.

NOTE:

Replacing the system board removes any changes that you have made to the BIOS using the BIOS setup

program. Make the appropriate changes again after you replace the system board.

NOTE:

Before disconnecting the cables from the system board, note the location of the connectors so that you can

reconnect the cables correctly after you replace the system board.

2. Remove the

base cover

3. Remove the

battery

4. Remove the

memory module

5. Remove the

M.2 2230 solid-state drive

from the SSD1 slot.

6. Remove the

M.2 2280 solid-state drive

from the SSD2 slot.

7. Remove the

heat sink (for systems shipped with integrated graphics)

or the

heat sink (for systems shipped with discrete

8. Remove the

9. Remove the

10. Remove the

About this task

The following images indicate the location of the system board and provide a visual representation of the removal procedure.

Removing and installing components

Summary of Contents for XPS 17 9720








































































Search results

Summary of Contents for XPS 17 9720

Reviews:

Related manuals for XPS 17 9720

Brands by name

Popular brands

Dell XPS 17 9720, Service Manual

Search results

Summary of Contents for XPS 17 9720

Reviews:

Related manuals for XPS 17 9720

Brands by name

Popular brands