3. Remove the seven screws (M2x4) that secure the solid-state drive thermal bracket and the battery to the palm-rest and
keyboard assembly.
4. Lift the battery off the palm-rest and keyboard assembly.
Installing the battery
Prerequisites
About this task
The following image indicates the location of the battery and provides a visual representation of the installation procedure.
Steps
1. Align the screw hole on each solid-state drive thermal bracket with the respective screw hole on the palm-rest and keyboard
assembly.
2. Replace the seven (M2x4) screws to secure the battery to the palm-rest and keyboard assembly.
3. Connect the battery cable to the system board.
Next steps
1. Install the
.
After working inside your computer
.
Memory modules
Removing the memory module
Prerequisites
Before working inside your computer
.
2. Remove the
.
Removing and installing components
17