background image

Dell Inc.

One Dell Way

Round Rock, TX 78664 USA

883939-01L Rev. K

August 2014

Printed in China

©2014 Dell Inc. All rights reserved. 

Safety Guidelines

Improper connection or use of this product could result in component failure or undesired interference. 
Read the following guidelines before setting up and operating your device.

Setup

•  Do not connect to AC power until all other connections (including the power adapter) are made. 
Connecting or disconnecting components or equipment on the back panel when the device is receiving 
AC power can cause power surges and damage the device.
•  Do not force a connector into its socket. If any undue resistance is encountered, ensure that the 
connector is correctly oriented to the receptacle.
•  Not all USB devices are supported; check with Dell or your Dell representative to 

fi

nd out if a particular 

device is supported on your device.
•  For wireless usage and requirements, refer to the regulatory notices in the device’s documentation.
Venting and Care
•  Mount the device only as shown or in accordance with the instructions provided with Dell-approved 
device and damage it.
• Allow su

cient space around the device for ventilation; do not place the device in any enclosure that 

restricts air

fl

ow around the device; do not place any objects on the device or block the vent outlets. Find 

environmental operating speci

fi

cations in the product Spec Sheet at www.dell.com/wyse/xenith3.

Power Sources

•  For regulatory compliance use only the power adapter that comes with your device or a Dell-approved 
equivalent. For proper replacement compare the labels on both device and power adapter to ensure that 
their voltages match.
Warning: Use of any other power adapter may damage your device or the power adapter. The damage 
caused by an improper power adapter is not covered by warranty.
•  Accidental loss of power can damage the device. Avoid connecting it to any power outlet which can be 
accidentally switched o

. Do not hard reset the device by holding down the power button during normal 

operation.
• When turning o

 the device, be sure to perform a complete shutdown (via the user interface or a light 

press on the power button). Do not disconnect the AC power cord, DC power cord, or shut o

 power at a 

circuit breaker (including power strips), etc., to turn o

 the device.

•  Surge protectors for electrical devices are recommended in areas of lightning. However, when 
lightning is occurring, your equipment should be properly shut down and unplugged from AC power until 
the storm has passed.
•  Be very careful to not interrupt power while the device is downloading a software update.

Battery

•  The device contains an internal button cell battery replaceable by Dell or one of our Authorized Service 
Centers. For service, visit ww.dell.com/wyse/asc.
Warning: There is a risk of explosion if the battery is replaced by an incorrect type. Always dispose of used 
batteries according to the instructions accompanying the battery.
Warning: Perchlorate Materials - Special Handling May Be Required under California Code of Regulations, 
title 22. (Only required within the USA.)

BACK

Dell Inc.                   

 

 

 

 

                Date:  8/15/2014

Job Name: Dell Wyse Xenith Quick Start Guide - 883939-01L Rev. K_ENG
Trim: 290mm x 140mm
Double-sided 
One Color

Shutting Down Wyse Xenith

Lightly press the power button on Wyse Xenith to shutdown.

Signing O

 from Wyse Xenith

After you disconnect from your desktop, if you are not automatically signed o

 

from Wyse Xenith, you can use the Shutdown icon in the Wyse Xenith toolbar to 
select Sign-o

 from account. 

Administrators: Refer to the administrators guide to set up auto-signo

 from Wyse 

Xenith. 

Need More Information?

Dell Reference Guides 

– Xenith Administrator and related documentation is available at: 

www.dell.com/wyse/manuals 

Dell Wyse Xenith Spec Sheet 

– Wyse Xenith features can be found in the Spec Sheet for your 

speci

fi

c zero client model. Spec Sheets are available at: www.dell.com/wyse/Xenith3 

Dell-Approved Mounting Accessory Kits

 – Information about approved mounting accessory 

kit options is available at: www.dell.com/wyse/accessories

Dell Service and Support

 – Latest software images are available at: 

www.dell.com/wyse/support

Dell

® 

Wyse Device Manager 

– Information about Dell remote management 

software is available at: www.dell.com/wyse/WDM

Dell and the Environment

 – Information about Dell compliance with 

RoHS and with the Waste Electrical and Electronic Equipment (WEEE) 
is available at: www.dell.com/environment

Dell and Recycling

 – Information about recycling and reuse 

of Dell products is available at: www.dell.com/recycling

Dell Warranty 

– The standard warranty is

three years from the date of purchase.

Reviews: