Using the TV Menu
29
FILE LOCATION:
D:\manual\W3201C manual\ch4e.fm
DELL CONFIDENTIAL – PRELIMINARY 12/30/05 – FOR PROOF ONLY
w
w
w
.d
el
l.
co
m
|
s
up
po
rt
.d
el
l.
co
m
AV1 (COMPOSITE 1) —
Select when you have a video device, such as a video game system,
connected to the composite connector on the bottom of the TV. See "Rear View" on page 7 for
the location of the composite video and audio connectors.
AV2 (COMPOSITE 2) —
Select when you have a video device, such as a video game system,
connected to the composite connector on the bottom of the TV. See "Rear View" on page 7 for
the location of the composite video and audio connectors.
AV3 (S-VIDEO 1) —
Select when you have a video device, such as a VCR, connected to the S-
Video connector on the bottom of the TV. See "Rear View" on page 7 for the location of the S-
Video connector.
AV4 (S-VIDEO 2) —
Select when you have a video device, such as a VCR, connected to the S-
Video connector on the bottom of the TV. See "Rear View" on page 7 for the location of the S-
Video connector.
AV5 (COMPONENT 1) —
Select when you have a video device, such as a DVD player, set-top box,
or cable TV box, connected to the component audio and video connectors on the bottom of the
TV. See "Rear View" on page 7 for the location of the component audio and video connectors.
AV6 (COMPONENT 2) —
Select when you have a video device, such as a DVD player, set-top box,
or cable TV box, connected to the component audio and video connectors on the bottom of the
TV. See "Rear View" on page 7 for the location of the component audio and video connectors.
AV SIDE (COMPOSITE 3) —
Select when you have a video device, such as a video game system,
connected to the composite connector on the side of the TV. See "Left View" on page 6 for the
location of the composite connector.
AV SIDE (S-VIDEO 3) —
Select when you have a video device, such as a VCR, connected to the S-
Video connector on the side of the TV. See "Left View" on page 6 for the location of the S-Video
connector.
SHOW INPUTS —
Show Inputs allows you to select Active or All. Active searches for which
connectors are being used. The available input sources appear in white and input sources that
are not available appear in grey. All shows all the input sources and allows you to select all the
input sources even if you do not have a device connected.
NOTE:
In
TV Menu Settings
, located in the
Setup
menu, you can set the
Input Select
to display the device
that you have attached. For example, AV2 would say DVD when you view the
Input Select
menu.
W3201C_UM_EN.book Page 29 Friday, December 30, 2005 6:09 PM