background image

Dell Networking W-IAP228 Wireless Instant Access Point

| Installation Guide

5

Identifying Specific Installation Locations

Use the AP placement map generated by Dell’s RF Plan software application to determine the proper installation 
location(s). Each location should be as close as possible to the center of the intended coverage area and should be 
free from obstructions or obvious sources of interference. These RF absorbers/reflectors/interference sources will 
impact RF propagation and should have been accounted for during the planning phase and adjusted for in the RF 
plan.

Identifying Known RF Absorbers/Reflectors/Interference Sources

Identifying known RF absorbers, reflectors, and interference sources while in the field during the installation 
phase is critical. Make sure that these sources are taken into consideration when you attach an AP to its fixed 
location. Examples of sources that degrade RF performance include:

Cement and brick

Objects that contain water

Metal

Microwave ovens

Wireless phones and headsets

Installing the IAP

CAUTION:  EU Statement: 
Lower power radio LAN product operating in 2.4 GHz and 5 GHz bands. Please refer to the 

Dell Networking W-Series

 

Instant 

User Guide

 for details on restrictions.

Produit réseau local radio basse puissance operant dans la bande fréquence 2.4 GHz et 5 GHz. Merci de vous referrer au 

Dell 

Networking W-Series

 

Instant User Guide

 pour les details des restrictions.

Low Power FunkLAN Produkt, das im 2.4 GHz und im 5 GHz Band arbeitet. Weitere Informationen bezlüglich Einschränkungen 
finden Sie im 

Dell Networking W-Series

 

Instant User Guide.

Apparati Radio LAN a bassa Potenza, operanti a 2.4 GHz e 5 GHz. Fare riferimento alla 

Dell Networking W-Series

 

Instant User 

Guide

 per avere informazioni detagliate sulle restrizioni.

NOTE:  Dell in compliance with governmental requirements, has designed the W-IAP228 access point such that only authorized 
network administrators can change configuration settings. For IAP configuration information, refer to the 

Dell Networking W-

Series Instant Quick Start Guide

 and 

Dell Networking W-Series Instant User Guide

.

CAUTION:  Access points are radio transmission devices and as such are subject to governmental regulation. Network 
administrators responsible for the configuration and operation of access points must comply with local broadcast regulations. 
Specifically, access points must use channel assignments appropriate to the location in which the access point will be used.

NOTE:  Service to all Dell Networking W-Series products should be performed by trained service personnel only.

Summary of Contents for W-IAP228

















Reviews: