manualshive.com logo in svg

Dell Vostro 5480, Owner'S Manual, Page: 86 / 106

Share
Download
Dell Vostro 5480 Owner'S Manual Download Page 86

Option

Description

Default setting: The option is enabled.

Intel TurboBoost

Allows you to enable or disable the Intel TurboBoost mode of the processor.

•

Enable Intel TurboBoost

Default setting: The option is enabled.

Wake on Dell USB-
C Dock.

Allows you to wake on Dell USB-C dock.

GUID-F5EEAFEE-26F9-4EA1-A75F-DD61B6A0BA2F

Power Management screen options

Option

Description

AC Behavior

Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected.
Default setting: Wake on AC is not selected.

Auto On Time

Allows you to set the time at which the computer must turn on automatically. The options are:

•

Disabled

•

Every Day

•

Weekdays

•

Select Days

Default setting: Disabled

USB Wake Support

Allows you to enable USB devices to wake the system from Standby.

NOTE: 

This feature is only functional when the AC power adapter is connected. If the AC power adapter 

is removed during Standby, the system setup removes power from all the USB ports to conserve battery 
power.

•

Enable USB Wake Support

•

Wake on Dell USB-C Dock: This option is enabled by default.

Wireless Radio 
Control

Allows you to enable or disable the feature that automatically switches from wired or wireless networks without 
depending on the physical connection.

•

Control WLAN Radio

•

Control WWAN Radio

Default setting: The option is disabled.

Wake on LAN/
WLAN

Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a 
LAN signal.

•

Disabled

•

LAN Only

•

WLAN Only

•

LAN or WLAN

86

System setup options

Summary of Contents for Vostro 5480











































































































Reviews:

No comments