Dell Vostro 3671 Service Manual Download Page 3

Page: 3 / 84

1 Working on your computer............................................................................................................ 5

2 Technology and components......................................................................................................... 7

HDMI 1.4..................................................................................................................................................................................7
USB features.......................................................................................................................................................................... 7

3 Removing and installing components............................................................................................ 10

Removing the cover.......................................................................................................................................................12
Installing the cover......................................................................................................................................................... 13

Front Bezel............................................................................................................................................................................15

Removing the front bezel..............................................................................................................................................15
Installing the front bezel................................................................................................................................................ 17

Hard drive..............................................................................................................................................................................19

Optical drive......................................................................................................................................................................... 33

Removing optical drive assembly.................................................................................................................................33
Installing optical drive assembly................................................................................................................................... 35

WLAN card........................................................................................................................................................................... 37

Removing WLAN card...................................................................................................................................................37
Installing WLAN Card.................................................................................................................................................... 38

Memory modules................................................................................................................................................................. 39

Removing memory module...........................................................................................................................................39
Installing the memory module...................................................................................................................................... 40

Expansion card.....................................................................................................................................................................40

Removing the PCIe expansion card............................................................................................................................ 40
Installing the PCIe expansion card...............................................................................................................................42

Optional card........................................................................................................................................................................44

Removing the optional card......................................................................................................................................... 44
Installing the optional card............................................................................................................................................46

Power supply unit................................................................................................................................................................ 48

Removing power supply unit........................................................................................................................................ 48

Contents

Summary of Contents for Vostro 3671





















































































Search results

Summary of Contents for Vostro 3671

Reviews:

Dell Vostro 3671, Service Manual, Page: 3 / 84

Search results

Summary of Contents for Vostro 3671

Reviews: