I/O Daughterboard
Removing the I-O daughterboard
1.
NOTE:
Power button is located on this PCB.
Follow the procedure in
Before working inside your computer
.
2. Remove the:
a)
b)
c)
3. Disconnect the I/O daughterboard cable from its connector on the system board.
4. Open the actuator [1] and remove the FFC cable from the I/O board [2].
5. Remove the two M2xL3 screws that secure the I/O daughterboard to the system board [1] .
6. Lift and remove the I/O daughterboard from the computer [2].
60
Disassembly and reassembly
Summary of Contents for Vostro 3300
