6
To remove the system board:
a Remove the 2.5x5L(3) screws that secure the system board to the computer [1].
b Lift and remove the system board from the computer [2].
Installing the system board
1
Align the system board into its original position on the computer.
2
Replace the 2.5x5L (3) screws to secure the system board to the computer.
3
Replace the M2x3L(4) screws that secure the system fan to the system board.
4
Connect the speaker cable to the system board.
5
Place the metal on the Thunderbolt port and replace M2.5xL5(2) screws that secures on the system board.
6
Place the metal on the power port and replace M2.5xL5(2) screw that secures on the system board.
7
Connect the coin cell battery and hard drive cable to the connector on the system board.
8
Connect the speaker cable to the system board.
9
Install the:
a
b
c
d
e
f
10 Follow the procedure in
After working inside your computer
.
Removing and installing components
31
Summary of Contents for Vostro 15-7570
Page 1: ...Dell Vostro 15 7570 Owner s Manual Regulatory Model P71F Regulatory Type P71F001 ...
Page 5: ...Palmrest view 1 Power button Fingerprint reader 2 Keyboard 3 Palmrest 4 Touchpad Chassis 5 ...
Page 6: ...Back view 1 Air vent 2 Air vent Bottom view 6 Chassis ...
Page 25: ...10 The component you are left with is the back cover Removing and installing components 25 ...
