manualshive.com logo in svg

Dell Vostro 15-3568, Owner'S Manual, Page: 70 / 84

Share
Download
Dell Vostro 15-3568 Owner'S Manual Download Page 70

Table 9. Security

Option

Description

Admin Password

Allows you to set, change, or delete the administrator (admin) password.

NOTE: 

You must set the admin password before you set the system or hard drive 

password. Deleting the admin password automatically deletes the system 
password and the hard drive password.

NOTE: 

Successful password changes take effect immediately.

Default Setting: Not set

System Password

Allows you to set, change or delete the system password.

NOTE: 

Successful password changes take effect immediately.

Default Setting: Not set

Internal HDD-0 Password

Allows you to set, change or delete the password on the system's internal hard-disk 
drive.

NOTE: 

Successful password changes take effect immediately.

Default Setting: Not set

Strong Password

Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.

NOTE: 

If Strong Password is enabled, Admin and System passwords must contain 

at least one uppercase character, one lowercase character and be at least 8 
characters long.

Password Configuration

Allows you to determine the minimum and maximum length of Administrator and 

System passwords.

Password Bypass

Allows you to enable or disable the permission to bypass the System and the Internal 

HDD password, when they are set. The options are:

• Disabled
• Reboot bypass

Default Setting: Disabled

Password Change

Allows you to enable the disable permission to the System and Hard Drive passwords 

when the admin password is set.
Default Setting: Allow Non-Admin Password Changes is selected.

Non-Admin Setup Changes

Allows you to determine whether changes to the setup options are allowed when an 

Administrator Password is set. If disabled the setup options are locked by the admin 
password.

UEFI Capsule Firmware Updates

Allows you to controls whether the system allows BIOS update via UEFI capsule update 

packages. Default setting: Enable

TPM 2.0 Security

Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:

• TPM On (enabled by default)
• Clear
• PPI Bypass for Enabled Commands
• PPI Bypass for Disabled Commands
• Attestation Enable (enabled by default)
• Key Storage Enable (enabled by default)
• SHA-256 (enabled by default)

System Setup

70

Summary of Contents for Vostro 15-3568





















































































Reviews:

No comments