Installing the Power Connector
1.
Install the power connector into the slot on the computer chassis.
2.
Connect the power connector cable to the system board.
3.
Install the:
a.
display assembly
.
b.
heat sink
.
c.
WLAN card
.
d.
battery
.
e.
back cover
.
4.
Follow the procedure in
After Working Inside Your computer
.
Removing the Camera
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
back cover
b.
battery
c.
display assembly
d.
display bezel
3.
Disconnect the camera cable and lift the camera to remove it from the computer.
20