Installing the heat sink
1. Align the screws on the heat sink with the screw holders on the system board.
2. Tighten the four captive screws to secure it to the system board.
NOTE:
Secure the screws in the order of the callout numbers [1, 2, 3, 4].
3. Install the:
a)
b)
c)
d)
4. Follow the procedures in
After working inside your computer
Järjestelmän tuuletin
Removing the system fan
1. Follow the procedure in
Before working inside your computer
.
2. Remove the:
a)
b)
c)
d)
3. To remove the system fan:
a) Disconnect the system fan connector cable from the system board [1].
b) Remove the two M2L5 screws that secure the system fan to the computer [2].
c) Lift and remove the system fan from the chassis [3].
Purkaminen ja kokoaminen
29