Dell VEP4600, Installation Manual

Page: 28 / 85

Upgrade x722 running on VEP4600
NOTE: To update the x722 firmware, follow the instructions in the readme.txt file found under each sub-tar ball.
Upgrade x722 driver through a DIAG OS SSH shell.
1. Log into a DIAG OS SSH shell
2. Run:
./vep4600_ufw_3.4 interactive
3. Select option 8 to
upgrade X722 firmware
Package version: x.x
Packaged images:
BMC image: x.x
BIOS image: 3.41.0.x-xx
CPLD image: XxXX
Wifi CPLD image: XxX
X722 image: x.xx
Note:If BMC version is less than 1.23 CPLD versions will not be shown correctly
1. Automatically update all firmware components
2. BMC image[Primary version:2.20, backup version:2.0]
3. BIOS image[Booted version:3.41.0.9-18]
4. CPLD image[CPLD version:v10 (0x10)]
5. rNDC left CPLD image[CPLD version:0x02]
6. rNDC right CPLD image[CPLD version:0x02]
7. intel rNDC firmware update:
[ left Type: NA, (0.0)]
[ right Type: X710, (0.DUP package – 19.05.12)]
Note: also need to update i40e driver to 2.10.19.82 and DPDK to or further version
8. intel X722 firmware[X722 firmware version:3.33]
Note: also need to update i40e driver to 2.10.19.82 and DPDK to or further version
9. Reset BMC after CPLD update completion and system bootup
q. Exit
Enter your choice:8
28 Upgrade rNDC and x722 firmware workaround