Dell UZ2215H User Manual Download Page 62

Page: 62 / 69

| Troubleshooting

Shaky/Jittery
Video

Wavy picture or
fine movement

•

Perform

Auto Adjust

via OSD.

•

Adjust the

Phase

and

Pixel Clock

controls via OSD.

•

Reset the monitor to

Factory Settings

•

Check environmental factors.

•

Relocate the monitor and test in another room.

Missing Pixels

LCD screen has
spots

•

Cycle power On-Off.

•

Pixel that is permanently Off is a natural defect that can
occur in LCD technology.

•

For more information on Dell Monitor Quality and Pixel
Policy, see Dell Support site at:

http://www.dell.com/

support/monitors

Stuck-on Pixels

LCD screen has
bright spots

•

Cycle power On-Off.

•

Pixel that is permanently off is a natural defect that can
occur in LCD technology.

•

For more information on Dell Monitor Quality and Pixel
Policy, see Dell Support site at:

http://www.dell.com/

support/monitors

Brightness
Problems

Picture too dim
or too bright

•

Reset the monitor to

Factory Settings

• Auto Adjust

via OSD.

•

Adjust brightness & contrast controls via OSD.

Geometric
Distortion

Screen not
centered
correctly

•

Reset the monitor to

Factory Settings

• Auto Adjust

via OSD.

•

Adjust horizontal & vertical controls via OSD.

NOTE:

When using DP/HDMI input, the positioning

adjustments are not available.

Horizontal/
Vertical Lines

Screen has one
or more lines

•

Reset the monitor to

Factory Settings

•

Perform

Auto Adjust

via OSD.

•

Adjust

Phase

and

Pixel Clock

controls via OSD.

•

Perform monitor self-test feature check and determine if
these lines are also in self-test mode.

•

Check for bent or broken pins in the video cable connector.

•

Run the built-in diagnostics.

NOTE:

When using DP/HDMI input, the

Pixel Clock

and

Phase

adjustments are not available.

Synchronization
Problems

Screen is
scrambled or
appears torn

•

Reset the monitor to

Factory Settings

•

Perform

Auto Adjust

via OSD.

•

Adjust

Phase

and

Pixel Clock

controls via OSD.

•

Perform monitor self-test feature check to determine if the
scrambled screen appears in self-test mode.

•

Check for bent or broken pins in the video cable connector.

•

Restart the computer in the

safe mode

Safety Related
Issues

Visible signs of
smoke or sparks

•

Do not perform any troubleshooting steps.

•

Contact Dell immediately.

Summary of Contents for UZ2215H






































































Search results

Summary of Contents for UZ2215H

Reviews:

Related manuals for UZ2215H

Brands by name

Popular brands

Dell UZ2215H, User Manual

Search results

Summary of Contents for UZ2215H

Reviews:

Related manuals for UZ2215H

Brands by name

Popular brands