Setting Up the Monitor
│
35
•
Thunderbolt™ 3 is not supported on versions of Windows prior to
Windows 10.
NOTE: The UP2720Q monitor ships with a USB-C Thunderbolt™ 3
Active cable. The USB-C DP cable is not included. If you are using a
computer with USB-C DP connection, please purchase the USB-C DP
cable separately. For more information, go to:
Connecting the monitor for Thunderbolt™ Multi-Stream Transport (MST)
function
NOTE: UP2720Q supports the Thunderbolt™ MST feature. To make use
of this feature, your PC must support Thunderbolt™ feature.
The default out of factory setting in the UP2720Q is Alternate Mode DP1.4.
To set up MST connection, please use only Thunderbolt™ 3 Active cable that came
with your monitor and perform the below steps:
1.
Turn Off your computer and disconnect the power cable.
2.
Connect the Thunderbolt™ 3 Active cable from the Thunderbolt™ upstream
port of Monitor One to your computer or device.
3.
Connect the other Thunderbolt™ 3 Active cable from the Thunderbolt™
downstream port of Monitor One to the Thunderbolt™ upstream port of
Monitor Two.
